SoftDent: How To Generate Patient Laser Labels

Document created by chriscornett Employee on Jul 21, 2017
Version 1Show Document
  • View in full screen mode


How to generate patient laser labels


Follow the steps below to generate Patient Laser Labels:


  1. Click Reports in the main menu bar.
  2. Select Patient.
  3. Select Labels.
  4. Select User Selected, Alphabetical, ID Order, or Zip Code Order.
  5. Select Laser Label File on the output options window.
  6. Click OK.
  7. Set up the report criteria as needed.
  8. Click OK.
  9. Allow the labels to be compiled. Please note that the labels will not be printed at this point and once the report has completed, the window will disappear.
  10. Click Reports in the main menu bar.
  11. Select Print Laser Labels.
  12. Highlight the Patient Labels line in the Laser Labels window.
  13. Click Print Selected.
  14. Allow the labels to be printed.

Equipment Needed:

Avery Standard 5160, Address Labels or equivalent. These address labels come 30 (thirty) to a sheet and are arranged in three columns of ten labels each.